POP + SPD SERIES

A surge protection device is a device that prevents the transmission of lightning to electrical equipment. The task of this device is to limit and minimize the influence of lightning on surrounding electrical equipment along power lines, signal lines, and metal wires.

POP+SPD is the series of combined transient and power frequency overvoltage protection devices, which includes solutions that especially meet outdoor lightning protection requirements. These devices are intended for installation within the lightning panel as a 1st step of surge protection while providing protection against temporary overvoltages to all the luminaires installed downstream of the panel.

Download: Catalogue

RATINGS AND FEATURES

• Maximum discharge current (8/20 μs): 40 kA
• Nominal discharge current (8/20 μs): 15 kA
• Un (L-N/L-L): 230/400 V
• End of life indication (LED)
• DIN rail mountable, monobloc format
• POP device to EN 50550, with Test Button
• POP actuation and reconnection via contactor (not included)
• Auto reconnect after voltage stabilisation via contactor
• Standards: IEC 61643-11, EN 61643-11

CATALOGUE NUMBERS

POP-40K230V-CT-4P – 83060100                            POP-40K230V-CT-4PM – 83060101

GIC is always committed to bringing satisfaction to customers. For further information, please do not hesitate to contact us.

____________________________________

GLOBAL INFRASTRUCTURE CORPORATION

 Fanpage: https://www.facebook.com/gic.net.vn

 Website: https://gic.net.vn/

 Hotline: (028) 6287 1568

 Email: info@gic.net.vn